- 压花辊的制作过程
- 本站编辑：杭州创兴花纹辊发布日期：2019-06-08 09:01 浏览次数：
压花辊适用于塑料片材、薄膜、铝箔、皮革、硬质板、壁纸、地砖、玻璃、纸类等凹凸花纹压制，提高产品表面美感、加强防伪、保护商标等效果。并可根据客户要求研制不同花样的压花辊。
压花辊的制作过程
1、辊体材质一般选用优质无缝钢管（特殊材质可根据用户需要定制）经镗磨内孔，使管壁厚度均匀再经焊接、去应力处理、车、磨、精加工而成；
2、校正静平衡及动平衡处理；成品辊筒同轴度≤0.02mm；
3、根据花纹，采用不同的加工工艺，达到压出的产品花型线条清晰，花纹精美，层次丰富，尺寸准确。
4、后表面镀硬铬或其他处理，硬度可达HRC58-62 。The pressure roller is suitable for pressing plastic sheet material, film, aluminum foil, leather, hard board, wallpaper, floor brick, glass, paper and other concave and convex patterns, improving the surface beauty of the product, strengthening Anti-Counterfeiting, and protecting the trademark. And according to customer requirements can be developed different patterns of pressure roller.
Production Process of Pressing Roller
1, roll body material generally selected high-quality seamless steel pipes(special materials can be customized according to user needs) through boring and grinding inner holes, so that the thickness of the tube wall is evenly welded, stress treatment, car, grinding, finishing;
2, correct static balance and dynamic balance treatment; The coaxial degree of the finished roller ≤ 0.02 mm;
3, according to the pattern, the use of different processing techniques, to achieve the pressure out of the product with clear flower lines, exquisite patterns, rich levels, accurate size.
4, the final surface plated with hard Chromium or other treatment, hardness up to HRC58-62.
